Shuttle
Rotoline Shuttle style rotational molding machine was developed to efficiently manufacture a wide variety of rotational molded parts. it is a dual station molding machine equipped with a central oven. The Shuttle Series work in conjunction with two cars, a central oven and two cooling stations to optimize the highest productivity and give the custumer and economic advantage. This design gives the customer the versatility to continue to run even during mold change over.
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machines is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle machine model has two cars that can be equipped with Straight arm or optional Offset arm "C" , both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motor breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machines is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steelstress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the comtroller of the gas bruners.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is eqquiped with a General Panel where are installed and interconected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural gas) and LPG (Liquified Petroleum Gas).
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. the oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equpped with General Panel where are installed and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motor breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific an concise input to controller of the gas burner.
For more information, contact Rotoline Sales Departament:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drivers), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be eqquiped with Straight arm or optional Offset arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information, contact Rotoline Sales Departament:
sales@rotoline.com
+1330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and and eletromechanical components such as PLC (Programable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and ontrol functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machines is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle machine model has two cars that can be equipped with Straight arm or optional Offset arm "C" , both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motor breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machines is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steelstress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the comtroller of the gas bruners.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is eqquiped with a General Panel where are installed and interconected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural gas) and LPG (Liquified Petroleum Gas).
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangement of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. the oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equpped with General Panel where are installed and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motor breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific an concise input to controller of the gas burner.
For more information, contact Rotoline Sales Departament:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programmable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drivers), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquified Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be eqquiped with Straight arm or optional Offset arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information, contact Rotoline Sales Departament:
sales@rotoline.com
+1330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and eletromechanical components such as PLC (Programable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and control functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
OVERVIEW
PHOTO GALLERY
DEFINITION
Mechanical Part: It consists of an inline arrangment of a central oven that shares the two cooling/load/unload stations, one on each side of the oven assembly. The oven has a cylindrical horizont design. ROTOLINE pioneered the manufacture of machines with cylindrical oven, which provides a homogeneous airflow in all areas of the oven avoiding "dead spots".
Electrical Part: The machine is equipped with a General Panel where are installed and interconnected all programmable and and eletromechanical components such as PLC (Programable Logic Controller), computer, contactors, motors breakers, power supplies, transformer, VFDs (variable frequency drives), push buttons, selector switches and light/sound alarms. This panel is mainly used to set the recipe parameters for the production.
Burner System: The heating system of the Rotoline machine is done with a gas burner. The machine is supplied with a burner ready to operate with two different types of fuel gas, NG (Natural Gas) and LPG (Liquefied Petroleum Gas).
Cars/Arms: The Shuttle Machine model has two cars that can be equipped with Straight Arm or optional Offset Arm "C", both built with a reinforced structure and heat treated for steel stress release.
Management Control: The PLC is loaded with a software management control system which gathers information from multiple sensors such as temperature and pressure, installed in various parts of machine, doing all the interlock and ontrol functions of machine operation and providing a specific and concise input to the controller of the gas burner.
For more information contact Rotoline Sales Department:
sales@rotoline.com
+1.330.677.3223
Rotoline with the objective of technical improvement, reserves the right to make any changes to its products without previous notice.
Rotational Molding Applications
RECEIVE OUR NEWS
Rotoline USA
4429 B - Crystal Parkway
Kent - Ohio - USA
44240
Phone: +1 330 677 3223
rotousa@rotoline.comRotoline Brasil
Acesso Canário da Terra, 380D
Chapecó - Santa Catarina - Brasil
CEP 89813 - 140
Fone: 55 49 3324-5680
Fax: 55 49 3323-3635
roto@rotoline.com02:43 am
Brasília - Brasil
01:43 am
New York - USA
Business Hours
Monday to Friday from 08:00 am to 12:00 am and 01:00 pm to 04:30 pm
Copyright © 2018 ROTOLINE. All rights reserved.
Download Brochure